Toshiba M100 사용자 가이드
211
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.4.0
system. Use Device Manager to make sure each device has its
own I/O base address. See
own I/O base address. See
for more information.
Since all PC Cards share the same socket, each card is not
required to have its own address.
required to have its own address.
Hot swapping (removing one PC Card and inserting
another without turning the computer off) fails.
another without turning the computer off) fails.
Follow this procedure before you remove a PC Card:
1
Double-click the PC Card icon on the taskbar.
2
Click Safely remove xxxx, where xxxx is the identifier
for your PC Card.
for your PC Card.
The operating system displays a message that you may
safely remove the card.
safely remove the card.
3
Remove the card from the slot.
The system does not recognize your PC Card.
Refer to the PC Card documentation.
Removing a malfunctioning card and reinstalling it can
correct many problems. For more information, see
correct many problems. For more information, see
.
A PC Card error occurs.
Reinsert the card to make sure it is properly connected.
If the card is attached to an external device, check that the
connection is secure.
connection is secure.
Refer to the card’s documentation, which should contain a
troubleshooting section.
troubleshooting section.
Printer problems
This section lists some of the most common printer problems: