Toshiba 1000-s157 사용자 가이드

197

5.375 x 8.375 ver 2.3

The use of DMA dramatically increases the DVD playback 
performance of your system.

To make sure DMA is turned on and to check its settings:

Open the Start menu, then click Control Panel.

Click the Performance and Maintenance icon, then 
click the System icon.

Click Hardware tab, then the Device Manager button.

Double-click IDE ATA/ATAPI controllers to expand it, 
then double-click Secondary IDE Channel.

The Properties Box appears. 

Select the Advanced Settings tab, then select DMA if 
available from the Transfer Modes drop-down list. In 
the correct device area, click OK.

The system must be restarted for this setting to take 
effect.

Most DVD titles have one or both of the “Root” and “Title” 
menus. If one menu button appears to do nothing, try the 
other menu button.

DVD playback performance is dependent upon several 
system resources. Changes to these system resources caused, 
for example, by installing a new graphics or audio card may 
impact performance. Some software changes may also 
impact playback performance (for example, downloading 
new drivers from the Web). 

Before installing a new hardware or software component on 
your system, check for any potential conflicts between its 
resource requirements and your current system configuration. 
Also, if you change your operating system, check with your