NorthStar 941x 사용자 설명서
Rev. D
4 — Creating Waypoints and Routes
4 — Creating Waypoints and Routes
4 — Creating Waypoints and Routes
4 — Creating Waypoints and Routes
Page 39
If this new waypoint is to be used as the center of an avoidance area, en-
ter the warning radius at the bottom of the screen in the WARN RADIUS
box. If no radius is entered, the point will be treated as a regular way-
point, and not as an avoidance area.
ter the warning radius at the bottom of the screen in the WARN RADIUS
box. If no radius is entered, the point will be treated as a regular way-
point, and not as an avoidance area.
You may designate new or existing waypoints as avoidance areas. Avoid-
ance areas are depicted on the PLOT screen as waypoints with circles
around them. In addition, an alarm will be given both as an audio beep
and a flashing exclamation point on the screen, if you should enter and
avoidance area.
ance areas are depicted on the PLOT screen as waypoints with circles
around them. In addition, an alarm will be given both as an audio beep
and a flashing exclamation point on the screen, if you should enter and
avoidance area.
The 941X will display each avoidance area as a circle the size of the
warning radius you entered. For new waypoints, enter a distance in the
WARN RADIUS box at the bottom of the NEW WAYPT screen. For ex-
isting waypoints, use the EDIT WAYPOINT function to access the way-
point coordinate screen, then enter the warning radius. Be sure to
include a little extra distance around the hazard so that you will have
time to respond by turning or stopping after you hear the alarm.
warning radius you entered. For new waypoints, enter a distance in the
WARN RADIUS box at the bottom of the NEW WAYPT screen. For ex-
isting waypoints, use the EDIT WAYPOINT function to access the way-
point coordinate screen, then enter the warning radius. Be sure to
include a little extra distance around the hazard so that you will have
time to respond by turning or stopping after you hear the alarm.
avoidance area
Avoidance
Areas