NorthStar 941x 사용자 설명서

Rev. D

5 — Waypoint and Route Navigation

Page 55

To navigate to a waypoint already stored in the 941X, first display it us-
ing one of the four waypoint list screens: press WAYPTS/ROUTES, then
the WAYPT LIST menu key. Use the up and down cursor arrow keys to
move the large arrow on the left of the screen so that it points to the
waypoint you want to navigate to. Then press the GO TO menu key, and
then ENTER.

The 941X will automatically switch to the STEER display to show infor-
mation for navigating to the waypoint. You can also press the STEER key
to display this information at any time. Two versions of the screen are
available to choose from.

WAYPOINT TIP

You can specify a waypoint to navigate to, and store it perma-

nently in the 941X’s database in one operation, if you like.
While in the

QUICK WAYPT

entry screen, just move the cur-

sor arrow up to the waypoint’s name and change it from

-QUIK-

to its permanent name before pressing

ENTER

. To

make a previously-entered QUICK waypoint become a perma-

nent waypoint, just go to a waypoint list screen and edit the

name (and description, if you wish).

Navigating to

Waypoints

WAYPOINT TIP

Since the waypoints you navigate to are usually nearby, the

LOCAL waypoint list is often the best list to use for finding the

waypoint in the database.