Vivitar 55 사용자 가이드
1. Shutter button
2. Flash
3. Self-timer LED
4. Viewfinder
5. Lens
6. Tripod socket
7.
2. Flash
3. Self-timer LED
4. Viewfinder
5. Lens
6. Tripod socket
7.
Power button
8. Viewfinder
BATT.
13
14
15
9. Status LED
10.Status LCD
11.
10.Status LCD
11.
MODE
Mode button
12. Flash button
13.USB connector
14.Strap eyelet
15.Battery cover
13.USB connector
14.Strap eyelet
15.Battery cover
1
2
3
4
11
10
9
7
6
5
8
1. Self-timer mode
2. Battery level
3. Movie mode
4. PC camera mode
5. Available number of shots
6. Burst mode
7. Low resolution
8. Flash mode
9. High resolution
10.Delete all mode
11.Delete one mode
2. Battery level
3. Movie mode
4. PC camera mode
5. Available number of shots
6. Burst mode
7. Low resolution
8. Flash mode
9. High resolution
10.Delete all mode
11.Delete one mode
Getting Started
1. Attach the hand strap.
2. Slide the battery cover in the direction of the
OPEN arrow.
3. Insert the batteries noting the correct orientation
of the batteries as shown.
4. Close the battery cover.
5. Press the button to turn on your ViviCam 55.
To turn off your ViviCam 55, again press the
button or toggle the
MODE
button until
appears on the status LCD and press
the shutter button.
the shutter button.
BATT.
Getting to Know Your ViviCam 55
ViviCam 55
7
8
9 10
11 12
Status LCD
Capturing Still Images
The ViviCam 55 features SDRAM only for temporary image storage. Always install the fresh
batteries in the ViviCam 55 before taking pictures. If you are going to change the batteries,
be sure to download the pictures to the computer.
1. Turn the ViviCam 55 on.
batteries in the ViviCam 55 before taking pictures. If you are going to change the batteries,
be sure to download the pictures to the computer.
1. Turn the ViviCam 55 on.
For self-timer photography, toggle the
MODE
button
until appears on the status LCD.
2. Compose your shot.
3. Press the shutter button.
3. Press the shutter button.
If the self-timer mode is set to on, an image is
captured after 10 seconds and the timer will then
turn itself off. The self-timer LED on the front of the
ViviCam 55 will blink for 10 seconds. In the first 7
seconds, the LED blinks slow rate and then rapidly
for the last 3 seconds.
captured after 10 seconds and the timer will then
turn itself off. The self-timer LED on the front of the
ViviCam 55 will blink for 10 seconds. In the first 7
seconds, the LED blinks slow rate and then rapidly
for the last 3 seconds.
The ViviCam 55 has an automatic power off function. It will automatic turn off when
there are no operations performed for over 30 seconds. To restore power, simply press
the button again.
there are no operations performed for over 30 seconds. To restore power, simply press
the button again.
Flash mode
Set the flash for taking photographs.
Set the desired flash mode by toggling the button.
Set the desired flash mode by toggling the button.
Î
[ ] Forced Flash Î [ ] Auto Flash Î [ ] Flash off Î
Burst mode
This mode is used for continuous shooting.
1. Toggle the
1. Toggle the
MODE
button until
appears on the status LCD.
2. Compose your shot.
3. Press the shutter button.
3. Press the shutter button.
3 pictures are taken continuously once the shutter
button is pressed.
button is pressed.
The flash mode will automatically be set to OFF.
Setting Image Resolution
Sets the image resolution.
1. Toggle the
1. Toggle the
MODE
button until
and / appear on
the status LCD.
2. While the / is blinking, press the shutter button to
change the image resolution ( Î or Î ).
The available number of shots will change
based on the current setting.
based on the current setting.
1
2
3
4
5
6