Cambridge SoundWorks dtt2500 사용자 가이드

3

16

Playing Microsoft DirectSound 3D
or Environmental Audio Games
1. Under CMSS on your DTT2500
    Digital decoder amplifier, select
    FOURPOINT to fully enjoy the
    4-channel gaming experience
    from Microsoft DirectSound3D
    or Creative Environmental
    Audio (EA) titles with a 4-
    channel audio card.
2. For Sound Blaster Live! users,
    enable the 4-Speaker configura-
    tion on your PC.  Otherwise,
    select FourPoint under CMSS on
    your DTT2500 Digital decoder
    amplifier unit.

Playing Multi-format DVD Games
These games have Dolby Digital or
Dolby Pro Logic movie clips mixed
with the actual game sequence.
Select the MUSIC or MOVIE mode
by pressing the Creative Multi
Speaker Surround (CMSS) button
until the LED for MUSIC or MOVIE
mode lights up.

Playing Conventional Games
Select MUSIC or MOVIE by pressing
the Creative Multi Speaker Surround
(CMSS) button until the LED for
MUSIC or MOVIE mode lights up.

Speaker Placement

Installation Sequence

1. Read all of the instructions before

installing the speaker system.

2. Using the placement instructions as

a guide, position the satellites, the
center channel speaker and
subwoofer around your computer.
Install the Desktop Stands and
Floor Stands as appropriate.  If you
wish to substitute a powered
subwoofer for the subwoofer that
comes with the DTT2500 Digital,
read Substituting a powered
subwoofer page 5.

3. Connect the satellite speakers,

center channel speaker, and
subwoofer to the back of the
Decoder Amplifier.

4. Connect the Dolby Digital output

of your digital program source
(typically a DVD player) to the
Dolby Digital input of the Decoder
Amplifier.

5. Connect your normal audio signal

sources via the Line In and Rear In
inputs.  An owner of a Sound
Blaster Live! sound card with a
Digital DIN output should use the
supplied cable to connect it to the
Digital DIN input instead.

6. With the Decoder Amplifier’s

power switch “off”, connect the
power supply adaptor to the
Decoder Amplifier.

7. Turn on the power.  Use the

SPEAKER TEST mode to position
and balance the speakers.

8. You may wish to experiment with

speaker placement briefly before
concealing the connecting cables
and making the installation more
permanent.

9. The unit is ready for you to enjoy.

Refer to the Quick Reference guide
for information about settings for
specific program sources like DVD,
CDs, Video CD and games.

The Front Satellites. The left front
and right front satellites play stereo
music, the off-screen sounds of
video playback and the front
channels of four channel games.

These satellites should be placed

to the sides of your monitor (see
Diagram A). Be sure to have a clear
line of sight from your listening
position to these satellites. The
satellites intended for front
placement have 3 meters (9 feet) of
cable.

Install the satellite’s Desktop

Stands when using them on the
desktop (see page 6).

The satellites may also be hung on the

wall behind the monitor using the screw
and wall anchors provided (see
“Mounting The Speakers”, page 7).

If you wish to save desktop space,

use the hook and loop fasteners to
attach the satellite speakers to the sides
of the computer monitor (see Diagram B).

The Center Channel Speaker. The
center channel speaker provides the on-
screen effects and dialog in Dolby
Digital, Dolby Surround or Creative
Multi Speaker Surround modes. It
should be placed as close to the center
of your computer monitor as possible.