Hitachi CP-WU8440 사용자 가이드

59

SCREEN menu

SCREEN menu

From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.

Using the ▲/▼/◄/► buttons switches the OSD (On Screen 

Display) language.

ENGLISH Ù FRANÇAIS Ù DEUTSCH Ù  ESPAÑOL

       

 

 (shown in the LANGUAGE dialog)   

Press the ENTER or INPUT button to save the language setting.

Using the ▲/▼/◄/► buttons adjusts the menu position.

To quit the operation, press the MENU button on the remote control 

or keep no operation for about 10 seconds.

Using the ▲/▼ buttons switches the BLANK screen.

The BLANK screen is displayed for the AV MUTE function (

25). It 

is displayed by pressing the AV MUTE button on the remote control.

MyScreen Ù ORIGINAL Ù BLUE Ù WHITE Ù BLACK

       

MyScreen :  Screen can be registered by the MyScreen item (

60).

ORIGINAL :  Screen preset as the standard screen.
BLUE, WHITE, BLACK :  Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 

screen will change to the plain black screen after several minutes.

Using the ▲/▼ buttons switches the mode for the start-up screen.

The start-up screen is a screen displayed when no signal or an 

unsuitable signal is detected.

MyScreen Ù ORIGINAL Ù OFF

       

MyScreen :  Screen can be registered by the MyScreen item (

60).

ORIGINAL :  Screen preset as the standard screen.
OFF :  Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL 

screen will change to the BLANK screen (

above) after several 

minutes. If also the BLANK screen is the MyScreen or ORIGINAL, 

the plain black screen is instead used.

• When the ON is selected to the MyScreen PASSWORD item in 

the SECURITY menu (

88), the START UP is fixed to MyScreen.

(continued on next page)