Canon S200 설치 설명서

Canon USA                                    S200 SH S1.ai

Clarity                                               August 2001

Unplug the power cord from the back

of the printer.

1

Turn your computer off.

2

Connect one end of a USB cable (not 

included) to the computer, the other to 

the printer.

3

IMPORTANT: Be sure printer is

unplugged before continuing, 

or the computer will attempt to 

install the printer driver before 

the printer is ready.

USB Port

USB Cable

USB Port

Ensure that the blue lock lever is raised.

Gently slide the printhead into the holder 

until it is securely seated.

Do not press it down.

Lower the lock lever until it locks into place.

Close the front cover and attach the 

paper rest and output tray. 

Place a stack of blank paper (up to 50 sheets)

in the paper rest. 

1

2

3

4

5

Electrical contacts

Remove the printhead from its package.

NOTE: Do not touch the electrical contacts.

1

2

Remove the protective cap and tape from

the printhead.

Shipping Tape

Serial 

number

The printer automatically turns on when

the printer is plugged in.

4

Open the front cover. The printhead holder

automatically moves to the center.

Plug the power cord into the back of the 

printer and connect the other end to a 

power outlet.

Remove the shipping tape from the front, 

sides and inside of the printer. 

Write down the serial number located to 

the right of the printhead. You will need 

this later to register the product.

1

2

3

Paper Rest

Output Tray

S200 Series

Color Bubble Jet Printer

Documentation 

and Software Kit

Power Cord

Printhead (ink tanks are included)

Carefully remove all items from the box.

1