Jura coffeeteam luxe 사용자 가이드

다운로드
페이지 19
The saucer blinks. The display 
will read "AM 12:00" and shows 
the number "10" in bold. 
c. Push and hold the”h”-button 
(G8) to program the hour at 
which you would like to make 
coffee later. Push and hold the 
“m”-button (G9) to program 
the minutes at which you would 
like to make coffee later. Now 
the time to make coffee later is 
programmed.
d. Push and hold the "2-10" button
(G11) until the desired number is
displayed in bold. Release this 
button. Then push and hold the 
"strength" button (G12) until the 
saucer sits under the desired 
cup. Release this button.
Note: Within 5 seconds the dis-
play will return to the current 
mode and the current grinder 
settings. To check if you are in 
the programming mode or in the
current mode just look at the 
saucer. If the saucer is not blink-
ing you are in the current mode.
If the saucer is blinking you are 
in the programming mode. 
e. If you wish to check the pro-
grammed settings, push the 
"prog" button (G10). The display
will show you the future time 
and the future grinder settings. 
Note: The settings for the grinder
can be different in the program
mode and in the regular (current)
mode.
Note: If you want your coffee
ready at 7:00 AM, set the timer to
6:45 AM.
See chapter 9, page 16 for
"Grinding and Brewing Coffee
Later".