Delta Electronics d3355 사용자 가이드

– iii – 

¾

  Only use the supplied power cord. 

¾

  Do not place anything on the power cord. Place the power cord where it will not be in the way of 

foot traffic. 

¾

  Remove the batteries from the remote control when storing or not in use for a prolonged period. 

Replacing the lamp can be hazardous if done incorrectly. Refer to “Replacing the Projection Lamp” on 
page 38 for clear and safe instructions for this procedure. Before replacing the lamp: 

¾

  Unplug the power cord. 

¾

  Allow the lamp to cool for about one hour. 

¾

  This product contains a metal halide lamp, which contains mercury. Dispose of it as required by 

local ordinances and regulations. 

¾

  The USA restricts or prohibits the disposal of some or all mercury containing lamps in the municipal 

waste stream. Please visit www.lamprecycle.org for more information on specific state disposal 
requirements and recycling facilities. 

¾

  The following states have laws that deal with information that wholesalers must provide to 

contractors for lamp disposal. 
Connecticut 
Maine 
Minnesota 
Rhode Island 

¾

  For users in Connecticut, please call our toll free number1-888-657-5267 to place an order for the 

delivery of a kit for returning a used lamp. The kit includes a box for the lamp, tape, and a return 
shipping label. To return a lamp: 

1.  Place the lamp in the box, complete the enclosed form, and seal the box with the 

provided tape.  

2.  Affix the return shipping label to the box and call 1.800.463.3339 FedEx Ground Service 

for box pickup. 

¾

  Unplug the power cord before cleaning. Refer to “Cleaning the Projector” on page 41. 

¾

  Allow the lamp to cool for about one hour. 

Before installing and using the projector, read the regulatory notices in the “Regulatory Compliance” 
section on page 55.