Haier xpb55-13s 사용자 설명서
Rinse with water-filing
Rinse with stored water
Rinsing
Using process
Using process
1.Put the laundries into the wash tub. Select
suitable current according to the laundries.
suitable current according to the laundries.
2.Adjust the water level
Set the water level with water level adjusting
lever according to the laundries quantity.
Then fill suitable water continuously.
Set the water level with water level adjusting
lever according to the laundries quantity.
Then fill suitable water continuously.
3.Rinse
Adjust the wash timer to 5-7 minutes to do
rinsing.
Adjust the wash timer to 5-7 minutes to do
rinsing.
OVERFILL
If the water flows out
of the overfill holes,
that is overfilling
of the overfill holes,
that is overfilling
1.Put the laundries into wash tub.Select suitable current according to
2.Fill water to preset water level
3.Rinse
Adjust the wash time to 2-3 minutes to do rinsing.
Adjust the wash time to 2-3 minutes to do rinsing.
When the laundries quantity is below 2.4kg,please use STANDARD current.
If you use STRONG current,it may splash.
If you use STRONG current,it may splash.
the laundries.
6
Pay attention to followings before washing the laundries
Confirm if
there's special
requirement for
the laundries.
there's special
requirement for
the laundries.
Clear the pocket.
Take out the
coins, sand,
hairpins etc.
Take out the
coins, sand,
hairpins etc.
Fasten the
buttons and
zippers.
buttons and
zippers.
The quantity of
the laundries
shall not exceed
the rated value.
The big laundries
like the jeans
shall be put in
loosely.
the laundries
shall not exceed
the rated value.
The big laundries
like the jeans
shall be put in
loosely.
When the pulsator
is running , the
buttons of the
laundries may
cause noise For
The sake of
discretion, please
put the laundries
with buttons into
other laundries.
is running , the
buttons of the
laundries may
cause noise For
The sake of
discretion, please
put the laundries
with buttons into
other laundries.
Preparation before washing
<1.2m
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put the drain hose up to suitable position.
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put the drain hose up to suitable position.
4.Slanting or uneven ground may result in
unstable working or abnormal noise. Please
make the machine stand horizontally.
unstable working or abnormal noise. Please
make the machine stand horizontally.