IBM 770 하드웨어 매뉴얼
FRU REPLACEMENT NOTICES
When you replace the system board, you must set the
UUID on the new system board as follows:
UUID on the new system board as follows:
1. Press and hold F1 and power on the computer.
2. Hold down F1 until the Easy-Setup menu appears.
3. Click on Config.
4. Press Ctrl + G. The UUID menu appears.
5. Press F5 to generate a new UUID, and press Enter
2. Hold down F1 until the Easy-Setup menu appears.
3. Click on Config.
4. Press Ctrl + G. The UUID menu appears.
5. Press F5 to generate a new UUID, and press Enter
to overwrite it to EEPROM.
CPU Card Replacement Notice (600E
and 770X Only)
and 770X Only)
You must restore the CPU card serial number to its
original number, when the CPU card is replaced. To save
and restore the CPU card serial number, follow the
instruction in “Serial Numbers” on page 20.
original number, when the CPU card is replaced. To save
and restore the CPU card serial number, follow the
instruction in “Serial Numbers” on page 20.
DC-DC Card Replacement Notice (600E
and 770X Only)
and 770X Only)
You must restore the DC-DC card serial number to its
original number, when the DC-DC card is replaced. To
save and restore the DC-DC card serial number, follow the
instruction in “Serial Numbers” on page 20.
original number, when the DC-DC card is replaced. To
save and restore the DC-DC card serial number, follow the
instruction in “Serial Numbers” on page 20.
22