Wacom intuos3 12x12 사용자 설명서
70
70
Intuos3 lens cursor
Available for use with 12x12 / A4 Oversize and 12x19 / A3 Wide tablet models, the lens cursor is an ideal
tool for entering precise coordinate position information into your computer. The lens cursor reports the
position of the cross-hair to the computer. This makes the lens cursor especially useful for digitizing
drawings into graphics and CAD applications.
tool for entering precise coordinate position information into your computer. The lens cursor reports the
position of the cross-hair to the computer. This makes the lens cursor especially useful for digitizing
drawings into graphics and CAD applications.
The left button is set to
C
C
LICK
by default, and is
the primary button used
for selecting.
for selecting.
The middle button is
set to M
set to M
IDDLE
C
LICK
by default.
The right button is set to R
IGHT
C
LICK
by default,
and displays a context menu when pressed.
Rotate lens for best viewing angle.
The left and right side rear buttons are set for B
ACK
and
F
ORWARD
functionality within your Internet browser.
The default setting for the Intuos3 lens cursor is M
OUSE
mode, enabling you
to move the screen cursor with a “pick up and slide” action similar to using a
traditional mouse. When using the lens cursor to digitize a drawing, the
lens cursor must be set to P
traditional mouse. When using the lens cursor to digitize a drawing, the
lens cursor must be set to P
EN
mode.
Important: When the lens cursor is not in use, place it on your
desk. Leaving an Intuos3 tool on the tablet may interfere with
screen cursor positioning when using other pointing devices.
desk. Leaving an Intuos3 tool on the tablet may interfere with
screen cursor positioning when using other pointing devices.
For order information on this and other available Intuos3 tools, see