Whirlpool wgd6600 사용자 가이드

■

Adjust Dryness. 

NOTE: Dryness selections can be made only while using 
Automatic Cycles.  

®

Moisture-sensing strips and temperature sensors inside the 
dryer drum monitor how fast the load is drying, how hot the air 
should be and when clothes are dry. The system automatically 
stops the cycle to help save time and avoid overdrying. 

■

Turn knob to desired Timed Cycle.

■

Press the TIME ADJUST up or down arrows until the 
desired drying time is displayed. Press the up or down 
arrows and the time will change by 1-minute intervals. 
Press and hold the up or down arrows and the time will 
change by 5-minute intervals.

NOTE: The Time Adjust features can be used only with 
the Timed Dry and the Enhanced Touch Up cycles.

■

Press TEMP until the desired temperature illuminates.

NOTE: The Temp feature can be used only with the Timed 
Dry and the Enhanced Touch Up cycles.

NOTE: During the Timed Dry Cycle, you can change the 
settings for Time, Temp, the WRINKLE SHIELD™ setting, and 
the End of Cycle Signal. 

5. (OPTIONAL STEP) If desired, select OPTIONS. For more details, 

see “Options.”

6. (OPTIONAL STEP) If desired, press END OF CYCLE SIGNAL. A 

signal will sound to alert you when a cycle ends. For more details, 
see “End of Cycle Signal.”

7. Press START. Be sure the door is closed.

■

If you do not press Start within 5 minutes of selecting the 
cycle, the dryer automatically shuts off.

■

If you wish to end your drying cycle after pressing Start, 
press PAUSE/CANCEL twice.

 

■

Press POWER.

■

Turn the knob to select either the Enhanced Touch Up or 
the Quick Refresh cycles.

■

Press the TIME ADJUST up or down arrows until the desired 
drying time is displayed. Press the up or down arrows and 
the time will change by 1-minute intervals. Press and hold 
the up or down arrows and the time will change by 5-minute 
intervals.

NOTE: The Time Adjust features can be used only with 
the Timed Dry and the Enhanced Touch Up cycles.

■

Press TEMP until the desired temperature illuminates.

NOTE: The Temp feature can be used only with the Timed 
Dry and the Enhanced Touch Up cycles. Only the Medium 
and High temperature settings can be used for the 
Enhanced Touch Up Cycle.

NOTE: During the Enhanced Touch Up cycle, you can change 
the settings for Time Adjust and Temp. Open the door or press 
PAUSE/CANCEL once to pause the cycle, or press PAUSE/
CANCEL twice to cancel a cycle.

Open the door or press PAUSE/CANCEL once. Press PAUSE/
CANCEL twice to cancel a cycle.

Close the door. Press START until dryer starts.

NOTE: Drying will continue from where the cycle was interrupted 
if you close the door and press Start within 5 minutes. If the cycle 
is interrupted for more than 5 minutes, the dryer will shut off. 
Select new cycle settings before restarting the dryer.

Select the correct cycle and dryness level or temperature for your 
load. If an Automatic Cycle is running, the display shows the 
estimated cycle time when your dryer is automatically sensing the 
dryness level of your load. If a Timed Cycle is running, the display 
shows the exact number of minutes remaining in the cycle.

Cool Down tumbles the load without heat during the last few 
minutes of all cycles. Cool Down makes the loads easier to handle 
and reduces wrinkling. The length of the Cool Down depends on the 
load size and dryness level.

■

Follow care label directions when they are available.

■

If desired, add a fabric softener sheet. Follow package 
instructions.

■

To reduce wrinkling, remove the load from the dryer as soon as 
tumbling stops. This is especially important for permanent 
press, knits, and synthetic fabrics.

■

Avoid drying heavy work clothes together with lighter fabrics. 
This could cause overdrying of lighter fabrics and lead to 
increased shrinkage or wrinkling.