3com 8807 참조 가이드

C

HAPTER

 66: NQA C

ONFIGURATION

 C

OMMANDS

Use the undo description command to delete the configured description 
information.

By default, there is no description information of the operation.

# Describes the test group as "Cary’s icmp test".

<SW8800>system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] nqa administrator icmp

 

[3Com-administrator-icmp] description Cary’s icmp test 

destination-ip ip-address

NQA test group view

ip-address: Destination IP address of the test.

Use the destination-ip command to configure the destination IP address of the 
test.

Use the undo destination-ip command to delete the configured destination IP 
address.

By default, no destination IP address of the test is configured.

The test can be performed only after the destination IP address is configured.

# Set the destination IP address of the test to 192.168.80.80.

<SW8800>system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] nqa administrator icmp

 

[3Com-administrator-icmp] destination-ip 192.168.80.80 

display nqa { results | history } [ administrator-name test-tag ]

Any view

results: Displays the test results.

history: Displays the history test record information.