3com 8807 참조 가이드

C

HAPTER

 9: GARP&GVRP C

ONFIGURATION

 C

OMMANDS

After every GARP application entity is started, the LeaveAll timer will be started 
simultaneously. The GARP application entity will send LeaveAll message after the 
timer times out to make other application entities re-register all attribute 
information on the entities themselves. Then, the LeaveAll timer is started and the 
new cycle begins.

Related command: display garp timer.

# Set GARP LeaveAll timer to 1s.

[SW8800] garp timer leaveall 100 

reset garp statistics [ interface interface-list ]

User view

interface-list: Specifies a list of Ethernet ports on which the GARP statistics 
information will be cleared, expressed as interface-list = { interface-type 
interface-number [ to interface-type interface-num] }&<1-10>. interface-type is 
interface type, and interface-number is interface number. The interface-number 
after the keyword to must be larger than or equal to that before to. &<1-10> 
means that the preceding parameter can be repeated up to 10 times.

Use the reset garp statistics command to reset the GARP statistics information 
(such as the packets received/sent and discarded by GVRP/GMRP). If the command 
has no parameter, it will clear the GARP statistics information of all the ports.

Related command: display garp statistics.

# Clear GARP statistics information.

<SW8800> reset garp statistics 

display gvrp statistics [ interface interface-list ]

Any view

Interface-list: List of Ethernet ports on which the GVRP statistics information is to 
be displayed, expressed as interface-list = { interface-type interface-number } [ to