3com 8807 참조 가이드

C

HAPTER

 10: E

THERNET

 P

ORT

 C

ONFIGURATION

 C

OMMANDS

Use the duplex command to configure the duplex attribute of the Ethernet port.

Use the undo duplex command to restore the duplex attribute of the port to 
default auto-negotiation mode.

By default, the duplex attribute is auto.

Related command: speed.

# Configure the Ethernet port Ethernet2/1/1 as auto-negotiation attribute.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] interface Ethernet 2/1/1

 

[3Com-Ethernet2/1/1] duplex auto 

Ethernet port view

None

Use the flow-control command to enable flow control feature on the Ethernet 
port to avoid discarding data packets due to congestion.

Use the undo flow-control command to disable flow control feature.

By default, flow control on the Ethernet port is disabled.

# Enable flow control on Ethernet2/1/1.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] interface Ethernet 2/1/1

 

[3Com-Ethernet2/1/1] flow-control 

flow-interval interval

Ethernet port view