3com 8807 참조 가이드

C

HAPTER

 19: VLAN-ACL C

ONFIGURATION

 C

OMMANDS

# Synchronize ACL configuration of VLAN 5 to Ethernet3/1/1 port manually.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] interface Ethernet3/1/1

 

[3Com-Ethernet3/1/1]port can-access vlan-acl vlan 5 

display vlan-acl-member-ports vlan vlan-id

Any view

vlan-id: VLAN ID, in the range of 1 to 4,094.

Use the display vlan-acl-member-ports command to view in this VLAN the ports 
with the ACL configuration of the VLAN synchronized to.

When a port is added to a VLAN, you may fail to synchronize the VLAN-ACL 
configuration of the VLAN because the resources are not enough or user-defined 
flow templates are applied to ports. You can use this command to view the ports 
to which the ACL rule configured on the specified VLAN is applied.

# View the ports to which the ACL rule configured on VLAN 5 is applied.

<SW8800>display vlan-acl-member-ports vlan 5

 

Vlan-acl member port(s):

 

      Ethernet2/1/11          Ethernet2/1/20          Ethernet2/1/21

 

      Ethernet2/1/22          Ethernet2/1/23          Ethernet2/1/24

 

      Ethernet2/1/25          Ethernet2/1/40