3com 8807 참조 가이드

C

HAPTER

 21: AAA 

AND

 RADIUS/HWTACACS P

ROTOCOL

 C

ONFIGURATION

 C

OMMANDS

Any view

isp-name: Specifies the ISP domain name, with a character string not exceeding 24 
characters. The specified ISP domain shall have been created.

Use the display domain command to view the configuration of a specified ISP 
domain or display the summary information of all ISP domains.

By default, this command displays the summary information about all the ISP 
domains in the system.

This command is used to output the configuration of a specified ISP domain or 
display the summary information of all ISP domains. If an ISP domain is specified, 
the configuration information will be displayed exactly the same, concerning the 
content and format, as the displayed information of the display domain 
command. The output information can help with ISP domain diagnosis and 
troubleshooting.

Related command: access-limit, domain, radius scheme, user-template, 
state, display domain.

# Display the summary information of all ISP domains of the system.

<SW8800> display domain

 

0  Domain = system

 

   State = Active

 

   Scheme = LOCAL   Access-limit = Disable

 

   Vlan-assignment-mode = Integer

 

   Domain User Template:

 

   Idle-cut = Disable

 

   Self-service = Disable

 

Default Domain Name: system

 

Total 1 domain(s).1 listed. 

display local-user [ domain isp-name | idle-cut { enable | disable } | 
service-type { ftp | lan-access | ppp | ssh | telnet | terminal } | state { active | 
block } | user-name user-name | vlan vlanid ]

Any view

domain isp-name: Configures to display all the local users in the specified ISP 
domain. isp-name specifies the ISP domain name with a character string not 
exceeding 24 characters. The specified ISP domain shall have been created.

idle-cut: Configures to display the local users according to the state of idle-cut 
function. disable means that the user disables the idle-cut function and enable