3com 8807 참조 가이드
324
C
HAPTER
21: AAA
AND
RADIUS/HWTACACS P
ROTOCOL
C
ONFIGURATION
C
OMMANDS
By default, a switch does not support a VLAN ID delivered by a RADIUS server to
be of string type.
be of string type.
Dynamic VLAN delivering enables an Ethernet switch to monitor network
resources available to users by adding the ports to which the authenticated users
connect to different VLANS according to the attributes delivered by RADIUS
servers. To work with Guest VLAN, ports are usually configured to perform
port-based authentications. (If you configure a port to perform MAC
address-based authentications, it can have only one user connected.)
resources available to users by adding the ports to which the authenticated users
connect to different VLANS according to the attributes delivered by RADIUS
servers. To work with Guest VLAN, ports are usually configured to perform
port-based authentications. (If you configure a port to perform MAC
address-based authentications, it can have only one user connected.)
Example
# Configure the VLAN delivering mode to be of string type.
[SW8800] private_group_id mode standard
self-service-url
Syntax
self-service-url enable url-string
self-service-url disable
View
ISP domain view
Parameter
url-string: The URL (uniform resource locator) of the Web page on a self-service
server. The Web page is used to modify passwords. This argument is a string that is
of 1 to 64 characters in length. Do not provide character of "?" in this argument.
If an URL contains "?", replace it with "|" when inputting the URL in the
command line.
server. The Web page is used to modify passwords. This argument is a string that is
of 1 to 64 characters in length. Do not provide character of "?" in this argument.
If an URL contains "?", replace it with "|" when inputting the URL in the
command line.
Description
Use the self-service-url enable command to configure self-service server uniform
resource locator (URL).
resource locator (URL).
Use the self-service-url disable command to remove the configuration of
self-service server URL.
self-service server URL.
By default, self-service server URL is not configured on a switch.
This command must be incorporated with a RADIUS server (such as a CAMS
server) that supports self-service. Self-service means that users can manage their
accounts and card numbers by themselves. And a server with the self-service
software installed is called a self-service server.
server) that supports self-service. Self-service means that users can manage their
accounts and card numbers by themselves. And a server with the self-service
software installed is called a self-service server.
Once this function is enabled on a switch, users can locate the self-service server
through the following operations:
through the following operations:
■
Select "Change user password" on the 802.1x client.
■
After the client opens the default explorer (IE or NetScape), it locates the
specified URL page used to change the user password on the self-service server.
specified URL page used to change the user password on the self-service server.
■
Change user password on this page.