3com 8807 참조 가이드

C

HAPTER

 26: I

NTEGRATED

 IS-IS C

ONFIGURATION

 C

OMMANDS

[SW8800] interface Vlan-interface 10

 

[3Com-Vlan-interface10] isis timer holding-multiplier 5 

isis timer lsp time

Interface view

time: Specifies the LSP interval, ranging from 1 to 1000 and measured in 
milliseconds. The default value is 33 milliseconds.

Use the isis timer lsp command to configure the interval at which IS-IS sends 
link-state packets on the interface.

Use the undo isis timer lsp command to restore the default setting.

Related command: isis timer retransmit.

# Set the LSP interval on Interface Vlan-interface 10 to 500 milliseconds.

[SW8800] interface Vlan-interface 10

 

[3Com-Vlan-interface10] isis timer lsp 500 

timer lsp-generation x y z [ level-1 | level-2 ]

undo timer lsp-generation [ level-1 | level-2 ]

IS-IS view

x: Maximum interval (in seconds) for generating LSP. It ranges from 1 to 120 and 
defaults to 5.

y: Interval (in milliseconds) between each trigger operation and each LSP 
generation operation. It ranges from 1 to 120,000 and defaults to 5,000.

z: Interval (in milliseconds) between two successive LSP generation operations. It 
ranges from 1 to 120,000 and defaults to 5,000.

level-1: Sets interval for Level-1 LSP only.

level-2: Sets interval for Level-2 LSP only.