3com 8807 참조 가이드

C

HAPTER

 28: IP R

OUTING

 P

OLICY

 C

ONFIGURATION

 C

OMMANDS

Route policy view

igp: Sets the BGP route information source as internal route.

egp: Sets the BGP route information source as external route

as-number: Specifies AS number of external route.

incomplete: Sets the BGP route information source as unknown source.

Use the apply origin command to configure to apply the route source.

Use the undo apply origin command to cancel the Apply sub-statement.

Related command: if-match interface, if-match acl, if-match ip-prefix, 
if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip 
next-hop, apply local-preference, apply cost, apply tag.

# Define an Apply sub-statement. When it is used for setting route information 
attribute, it sets the route source of BGP route information as IGP.

[3Com-route-policy] apply origin igp 

apply tag value

Route policy view

value: Specifies the tag value of route information.

Use the apply tag command to configure to set the tag area of OSPF route 
information. Use the undo apply tag command to cancel the Apply 
sub-statement.

Related command: if-match interface, if-match acl, if-match ip-prefix, 
if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip 
next-hop, apply local-preference, apply cost, apply origin.

# Define one Apply sub-statement. When it is used for setting route information 
attribute, it sets the tag area of route information as 100.

[3Com-route-policy] apply tag 100