3com 8807 참조 가이드

This command is used to set the aging time of the multicast group member so 
that the refresh frequency can be controlled. When the group members change 
frequently, the aging time should be comparatively short, and vice versa.

Related command: igmp-snooping.

# Set the aging time to 300 seconds.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] igmp-snooping host-aging-time 300 

igmp-snooping max-response-time seconds

System view

seconds: Maximum response time for a query, ranging from 1 to 25 seconds. By 
default, it is 1 second.

Use the igmp-snooping max-response-time command to configure the 
maximum response time for a query.

Use the undo igmp-snooping max-response-time command to restore the 
default value.

The set maximum response time decides the time limit for the switch to respond 
to IGMP Snooping query packets.

Related command: igmp-snooping and igmp-snooping router-aging-time.

# Set the maximum response time for the IGMP Snooping packet to 15s.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] igmp-snooping max-response-time 15 

System view