3com 8807 참조 가이드

interface interface-type interface-number: Interface type and interface number, 
used to specify the interface.

Use the display pim neighbor command to view the PIM neighbor information 
discovered by the switch interface. If the interface type and interface number are 
specified, this command only displays the PIM neighbor information on the 
specified interface.

# Display PIM neighbor information discovered by the switch interface.

<SW8800> display pim neighbor

 

Neighbor’s Address  Interface Name               Uptime    Expires

 

90.0.0.2            Vlan-interface90              00:00:36  00:01:40 

display pim routing-table [ { { *g [ group-address [ mask { mask-length | mask } 
] ] | **rp [ rp-address [ mask { mask-length | mask } ] ] } | { group-address [ mask { 
mask-length | mask } ] | source-address [ mask { mask-length | mask } ] } * } | 
incoming-interface { interface interface-type interface-number | null } | { 
dense-mode | sparse-mode } ] *

Any view

*g: (*, G) route entry.

mask: IP address mask.

mask-length: Length of the IP address mask.

**rp: (*, *, p) route entry.

rp-address: Address of the RP.

group-address: Address of the multicast group.

source-address: IP address of the multicast source.

incoming-interface interface interface-type interface-number: Route entry with 
the specified incoming interface.

Table 89   Description on the fields of display pim neighbor command

Neighbor 
Address 

Neighbor address 

Interface 

Interface where the neighbor has been discovered 

Uptime 

Time passed since the multicast group has been discovered 

Expires 

Specifies when the member will be removed from the group