3com 8807 참조 가이드

C

HAPTER

 2: C

OMMANDS

 U

SED

 

TO

 L

OG

 

IN

 

TO

 S

WITCH

user-interface [ type ] first-number [ last-number ]

System view

type: Specifies the user interface type, which can be aux, console or vty.

first-number: Specifies the number of the first user interface to be configured. It 
must be an integer in the range of 0 to 6.

last-number: Specifies the number of the last user interface to be configured. It 
must be an integer in the range of 1 to 6 and it must be greater than the value of 
first-number.

Use the user-interface command to enter single user interface view to configure 
the corresponding user interfaces.

# Enter vty 0 user interface view for configuration.

<SW8800>system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] user-interface vty 0

 

[3Com-ui-vty0] 

user privilege level level

User interface view

level: Specifies which level of command a user can use after login from the 
specifically user interface, ranging from 0 to 3.

Use the user privilege level command to configure which level of command a 
user can use after login from the specifically user interface, so that a user can use 
all the available commands at this level.

Use the undo user privilege level command to restore the default level of 
command a user can use after login from the specifically user interface.

By default, a user can access the commands at Level 3 after logging in through the 
Console user interface, and the commands at Level 0 after logging in through the 
AUX or VTY user interface.