3com 8807 참조 가이드

C

HAPTER

 40: BGP/MPLS VPN C

ONFIGURATION

 C

OMMANDS

Fast Ethernet port view

None

Use the port vpn-range share-mode command to set the range of MPLS/VPN 
VLAN vlan-id on the interface to 4K.

Use the undo port vpn-range share-mode command to restore the default 
MPLS/VPN VLAN vlan-id range, which is 0 to 1023.

n 

■

Ports supporting this function stop supporting the application of ACL rules.

■

After you cancel the port vpn-range share-mode configuration, the label 
range does not take effect if the VLAN configuration on the port exceeds 1K. In 
this case, you need to delete the labels manually.

# Enable the range of MPLS/VPN VLAN vlan-id on Ethernet3/1/1 as 4K.

<SW8800> system-view

 

[SW8800] interface Ethernet 3/1/1

 

[3Com-Ethernet3/1/1] port vpn-range share-mode enable 

preference ebgp-preference ibgp-preference local-preference

VPN-instance sub-address family view

ebgp-preference: Preference of the routes learned from the EBGP peer, in the 
range 1 to 256.

ibgp-preference: Preference of the routes learned from the IBGP peer, in the range 
1 to 256.

local-preference: Preference of the Local routes, in the range 1 to 256.

Use the preference command to set preference value for a BGP route.

Use the undo preference command to remove the setting.