3com 8807 참조 가이드

C

HAPTER

 45: ARP C

ONFIGURATION

 C

OMMANDS

VLAN view

None

Use the arp proxy enable command to enable ARP proxy function.

Use the undo arp proxy enable command to disable ARP proxy function.

By default, ARP proxy function is disabled.

You can configure these commands for a VLAN and sub-VLAN. If you enable ARP 
proxy for a VLAN, the device with ARP proxy function directly forwards received 
ARP requests in the VLAN. If you enable ARP proxy for a sub-VLAN, the device 
with ARP proxy function directly forwards received ARP requests in other 
sub-VLANs which belong to the same super-VLAN and also have the ARP proxy 
function enabled.

Related command: display arp proxy.

# Enable ARP proxy function for VLAN 2.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] vlan 2

 

[3Com-vlan2] arp proxy enable 

arp static ip-address [ mac-address [ vlan-id { interface-type interface-number } ] [ 
vpn-instance vpn-instance-name ]

undo arp ip-address

System view

ip-address: IP address of the ARP mapping entry.

mac-address: MAC address of the ARP mapping entry, whose format is H-H-H ( H 
indicates a hexadecimal number).

vlan-id: VLAN to which the static ARP entry belongs, in the range of 1 to 4094.

interface-type interface-number: The type and number of the port to which the 
static ARP entry belongs. For the specific parameter values, refer to the description 
on the interface command in Ethernet Port Command Manual.

vpn-instance vpn-instance-name: VPN instance name in MPLS VPN.