3com 8807 참조 가이드
VLAN Configuration Commands
81
Example
# Name the current VLAN 2 "hello".
[3Com-vlan2] name hello
shutdown
Syntax
shutdown
undo shutdown
View
VLAN interface view
Parameter
None
Description
Use the shutdown command to disable the VLAN interface.
Use the undo shutdown command to enable the VLAN interface.
By default, when all the Ethernet ports in a VLAN are in the Down state, this VLAN
interface is also Down. When there are one or more Ethernet ports in the Up state,
this VLAN interface is also Up.
interface is also Down. When there are one or more Ethernet ports in the Up state,
this VLAN interface is also Up.
This command can be used to start interface after the related parameters and
protocols of VLAN interface are set. Or when the VLAN interface fails, the
interface can be shut down first and then restarted. In this way, the interface may
be restored to normal status.
protocols of VLAN interface are set. Or when the VLAN interface fails, the
interface can be shut down first and then restarted. In this way, the interface may
be restored to normal status.
Shutting down or bringing up a VLAN interface will not affect any Ethernet port of
this VLAN.
this VLAN.
Example
# Shut down Vlan-interface 2.
[3Com-Vlan-interface1] shutdown
trap-to-cpu disable
Syntax
trap-to-cpu disable
undo trap-to-cpu disable
View
VLAN view
Parameter
None
Description
Use the trap-to-cpu disable command to move the CPU port out of a VLAN.