3com 8807 참조 가이드

C

HAPTER

 4: VLAN C

ONFIGURATION

 C

OMMANDS

Note that you can add/delete trunk port and hybrid port to/from VLAN by the port 
and undo port commands in Ethernet port view, but not in VLAN view.

Related command: display vlan.

# Add Ethernet2/1/1 through Ethernet2/1/3 to VLAN 2.

[3Com-vlan2] port ethernet2/1/1 to ethernet2/1/3 

display protocol-vlan interface { interface-list | all }

Any view

interface-list: Displays the protocol information of a specified interface, in the form 
of interface-list = { interface-type interface-number [ to interface-type 
interface-number ] }. interface-type is interface type, interface-number is interface 
number. The interface number after the keyword to must be larger than or equal 
to the interface number before to.

all: Displays the protocol information of all ports.

Use the display protocol-vlan interface command to view the protocol 
information and protocol index configured on the specific port, to which you can 
refer when you use the protocol-based VLAN and add/delete a protocol.

Related command: display interface.

# Display the protocol information and protocol index configured on 
Ethernet2/1/1.

<SW8800> display protocol-vlan interface ethernet2/1/1

 

 Interface: Ethernet2/1/1

 

      Vlan-ID  Index    Type              Value

 

      10        0         at

 

      10        1         ethernetii      etype 0x0600

 

      10        2         llc              dsap 0x01 ssap 0x02

 

      10        3         snap             etype 0x0700

 

      10        4         ipx ethernetii

 

      10        5         ipx llc

 

      10        6         ipx raw

 

      10        7         ipx snap