3com 8807 참조 가이드

C

HAPTER

 49: N

ETSTREAM

 C

ONFIGURATION

 C

OMMANDS

Use the ip netstream timeout active command to configure the active aging 
time of the streams on all the NMM modules in the system.

Use the undo ip netstream timeout active command to restore the default 
value of the active aging time of the streams on all the NMM modules in the 
system.

By default, the active aging time of the stream is 30 minutes.

When the active time of a stream (from the set-up time to now) exceeds the set 
limit, it will be aged.

Related command: ip netstream timeout inactive.

# Set the active aging time of Netstream to 60 minutes.

<SW8800> system-view

 

[SW8800] ip netstream timeout active 60 

ip netstream timeout inactive seconds

System view

seconds: Inactive aging time of Netstream in seconds.

Use the ip netstream timeout inactive command to configure the inactive aging 
time of Netstream.

Use the undo ip netstream timeout inactive command to restore the default 
setting.

By default, the inactive aging time of Netstream is 60 seconds.

When the inactive time of a stream (from the time when the last packet of this 
stream flows by to now) exceeds the set limit, it will be aged.

Related command: ip netstream timeout active.

# Set the inactive aging time of Netstream to 150 seconds.

<SW8800> system-view

 

[SW8800] ip netstream timeout inactive 150