3com 8807 참조 가이드

C

HAPTER

 50: P

O

E C

ONFIGURATION

 C

OMMANDS

n 

■

The sampling cycle of the power, current and voltage of ports is 1 second;

■

The sampling cycle of the peak power and average power of ports is 5 minutes

display poe interface power [ interface-type interface-num ]

Any view

interface-type interface-num: Port type and port number; refer to Command 
Manual - Port for details.

Use the display poe interface power interface-type interface-num command to 
display the PoE power information of the specified port on the switch. If you enter 

Table 118   Description on the fields of the display poe interface command

Port power status 

PoE status of the port:

1 disabled: PoE is disabled on the port.

2 searching: the port is searching for a PD.

3 delivering: the port is supplying power to the PD.

4 PD disconnected: the port is not connected with a PD.

5 testing: the port is in testing.

6 fault: the port detected an nonstandard or fault PD. 

Port power mode 

PoE mode of the port:

1 auto: the system automatically selects the PoE mode.

2 signal

3 spare 

Port PD class 

The class of the power the port supplies to the PD 

Port power priority 

Port priority:

1 critical (the highest)

2 high

3 low 

Port max power 

Maximum power on the port 

Port current power 

Present power on the port 

Port average power 

Average power on the port 

Port peak power 

Peak power on the port 

Port current 

Present current on the port 

Port voltage 

Present voltage on the port 

Port remaining 
power 

Remaining power on the port