3com 8807 참조 가이드

ip address ip-address { mask | mask-length } [ sub ]

undo ip address [ ip-address { mask | mask-length } [ sub ] ]

VLAN interface view, loopback interface view, or console view

ip-address: IP address of VLAN interface in dotted decimal format.

mask: Corresponding subnet mask in dotted decimal format.

mask-length: Mask length. That is, the number of bits with a value of 1.

sub: Specifies the IP address to be configured to be the secondary IP address of 
the VLAN interface/loopback interface.

Use the ip address command to assign an IP address and the corresponding 
subnet mask to the VLAN interface/loopback interface/console interface.

Use the undo ip address command to remove the IP address and the 
corresponding subnet mask assigned to the VLAN interface/loopback 
interface/console interface.

ICMP packet input number

Echo reply:

Unreachable:

Source quench:

Routing redirect:

Echo request:

Router advert:

Router solicit:

Time exceed:

IP header bad:

Timestamp request:

Timestamp reply:

Information request:

Information reply:

Netmask request:

Netmask reply:

Unknown type: 

Total received ICMP packets, including:

Echo reply packets, unreachable packets, 
source quench packets, routing redirect 
packets, echo request packets, route 
advertisement packets, route solicitation 
packets, packets that exceed the time, packets 
with bad IP headers, timestamp request 
packets, timestamp reply packets, information 
request packets, information reply packets, 
netmask request packets, netmask reply 
packets and unknown packets. 

DHCP packet deal mode 

DHCP packet processing mode

Table 11   Description on the fields of the display ip interface command