3com 8807 참조 가이드
1032
C
HAPTER
61: S
YSTEM
M
AINTENANCE
C
OMMANDS
display users
Syntax
display users [ all ]
View
Any view
Parameter
all: Displays all users connected to the switch.
Description
Use the display users command to view information about users connected to
the switch.
the switch.
Example
# Display the information about all the active users on the console.
<SW8800> display users
UI Delay Type Ipaddress Username
+ 0 CON 0 00:00:00
130 VTY 0 00:00:05 TEL 192.168.1.253 tb
# Display the information about all the users on the console.
<SW8800> display users all
UI Delay Type Ipaddress Username
+ 0 CON 0 00:00:00
129 AUX 0
+ 130 VTY 0 00:00:16 TEL 192.168.1.253 tb
131 VTY 1
132 VTY 2
133 VTY 3
134 VTY 4
display version
Syntax
display version
View
Any view
Table 152 Description on the fields of the display users command
Field
Description
+
Information about an active user
UI
The first number is the absolute number of the UI (user interface), and the second
number is the relative number of the UI.
number is the relative number of the UI.
Delay
The time elapsing after the last user input, in the format of hh:mm:ss
Type
User type, such as Telnet, SSH, PAD
Ipaddress Initial connection location, that is, the IP address of the incoming host
Username Name of the user who uses this UI, that is, the login username of this user. If the
current terminal line is in anonymous login mode (AAA authentication is enabled
on it), this field is null
on it), this field is null