3com 8807 참조 가이드

C

HAPTER

 9: GARP&GVRP C

ONFIGURATION

 C

OMMANDS

System view/Ethernet port view

None

Use the gvrp command to enable GVRP.

Use the undo gvrp command to disable GVRP.

By default, GVRP is disabled.

This command can be used to enable/disable global GVRP in system view or 
enable/disable port GVRP in Ethernet port view.

Before enabling port GVRP, you must enable global GVRP first. In addition, port 
GVRP must be enabled/disabled on Trunk ports.

Related command: display gvrp status.

# Enable global GVRP.

[SW8800] gvrp 

gvrp registration { fixed | forbidden | normal }

undo gvrp registration

Ethernet port view

fixed: Enables to create or register VLAN on the port manually and disables to 
register or deregister VLAN dynamically.

forbidden: Deregisters all VLANs except VLAN 1 and disables to create or register 
any other VLAN on the port.

normal: Enables to create, register and deregister VLAN on the port manually or 
dynamically.

Use the gvrp registration command to configure GVRP registration type.