3com 8807 참조 가이드

C

HAPTER

 10: E

THERNET

 P

ORT

 C

ONFIGURATION

 C

OMMANDS

Any view

None

Use the display jumboframe configuration command to view the Jumbo frame 
configuration on all cards. The supported Jumbo frame length ranges, as well as 
the default values, may vary from card to card.

# Display the current Jumboframe configuration in the system.

<SW8800>system-view 

 

[SW8800] display jumboframe configuration

 

The jumboframe configuration at present:

 

Slot 2:

 

 Allow jumbo frame to pass

 

 The Maximum Frame Length is 1552  

display port { hybrid | trunk }

Any view

Input(total): 0 packets, 0 bytes

0 broadcasts, 0 multicasts

Input(normal): 0 packets, 0 bytes

- broadcasts, - multicasts

Input: 0 input errors, 0 runts, 0 giants, 0 
throttles, 0 CRC

0 frame, 0 overruns, - aborts, 0 ignored, - 
parity errors

Output(total): 0 packets, 0 bytes

0 broadcasts, 0 multicasts, 0 pauses

Output(normal): 0 packets, 0 bytes

- broadcasts, - multicasts, 0 pauses

Output: 0 output errors, - underruns, - buffer 
failures

0 aborts, 0 deferred, - collisions, 0 late 
collisions

- lost carrier, - no carrier 

The statistics information of input/output 
packets and errors on this port. "-" indicates 
that the item doesn’t supported by the switch.

Table 19   Description on the fields of the display interface command