3com 8807 참조 가이드

C

HAPTER

 11: E

THERNET

 L

INK

 A

GGREGATION

 C

ONFIGURATION

 C

OMMANDS

display link-aggregation interface interface-type interface-number [ to 
interface-type interface-number ]

Any view

interface { interface-type interface-number [ to interface-type interface-number ]: 
Specifies a port or ports. Without the parameter to, one port is specified. You can 
specify multiple contiguous ports with the parameter to. interface-type specifies 
port type and interface-number specifies port number. For more information, see 
the parameter item for the interface command.

Use the display link-aggregation interface command to view detailed link 
aggregation information at a designated port, including aggregation group ID for 
the port, port priority, operation key, flag, peer information (system ID, port 
number, port priority, operation key, flag).

Note that since the manual aggregation group cannot get the information of the 
peer end, every item of the peer end is displayed as 0, which does not indicate the 
actual status of the peer system.

# Display detailed link aggregation information of link aggregation group.

<SW8800> display link-aggregation interface ethernet2/1/1

 

 Ethernet2/1/1:

 

   Attached AggID: 1

 

   Local:

 

     Port-Priority: 32768, Oper key: 1, Flag: 0x00

 

   Remote:

 

     System ID: 0x0, 0000-0000-0000

 

     Port Number: 0, Port-Priority: 0, Oper-key: 0, Flag: 0x00

 

Received LACP Packets: 0 packet(s), Illegal: 0 packet(s)

 

   Sent LACP Packets: 0 packet(s) 

Port State 

Port state 

Local:

Port Status Priority Flag 
Oper-key Link-Status 

Other information of the local end, including member ports, 
port state, port priority, flag bit , operation key and link status. 

Remote:

Actor Partner Priority Flag 
Oper-key SystemID 

Detailed information about the peer device, including local 
port, peer port index, port priority, flag, operation key and 
device ID

Table 22   Description on the fields of the display link-aggregation verbose command

Table 23   Description on the fields of the display link-aggregation interface command

Attached AggID 

Aggregation group ID for the specified port