3com 8807 참조 가이드
ACL Commands
217
The matched times here refer to the software matched times, that is, the matched
times of the ACLs that needed to be processed by CPU. You can collect hardware
matched times value by using the traffic-statistic command.
times of the ACLs that needed to be processed by CPU. You can collect hardware
matched times value by using the traffic-statistic command.
Example
# Display contents of all ACLs.
<SW8800> display acl config all
Link ACL 4000, 1 rule,
rule 0 permit ingress any egress any
Basic ACL traffic-of-host, 1 rule,
rule 1 deny source 10.1.1.1 0 time-range 3com-3com(0 times matched) (Active)
display acl remaining
entry
Syntax
display acl remaining entry slot slotid
View
Any view
Parameter
slot slotid: the ID of the specified slot.
Description
Use the display acl running-packet-filter command to display the total number
of ACL rules that are applied on the specified card.
of ACL rules that are applied on the specified card.
Example
# Display the total number of ACL rules that are applied on the slot 5.
<SW8800> display acl remaining entry slot 5
Slot: 5
Resource Total Reserved Configured Remaining Start End
Type Number Number Number Number Port Name Port Name
--------------------------------------------------------------------------
METER 256 0 0 256 GE5/1/1 GE5/1/12
METER 256 0 0 256 GE5/1/13 GE5/1/24
RULE 1024 0 0 1024 GE5/1/1 GE5/1/12
RULE 1024 0 0 1024 GE5/1/13 GE5/1/24
ACTION 1024 0 0 1024 GE5/1/1 GE5/1/12
ACTION 1024 0 0 1024 GE5/1/13 GE5/1/24
Table 28 The description of the information on display
Field
Description
Resource Type
Resource type
METER: the resource is the flow meter resource;
RULE: the resource is the rule resource;
ACTION: the resource is action resource
Total Number
The total number of ACL rules that are supported by the
hardware
hardware
Reserved Number
The number of the reserved ACL rules
Configured Number
The number of the ACL rules that have been configured
Remaining Number
The number of the remaining ACL rules
Start Port Name, End Port Name The names of the start port and the end port