3com 8807 참조 가이드

다운로드
페이지 1099
802.1x Configuration Commands
295
 
 Total maximum 802.1x user resource number is 2048
 
 Total current used 802.1x resource number is 0
 
 
 Ethernet3/1/1  is link-down
 
   802.1X protocol is disabled
 
   Proxy trap checker is disabled
 
   Proxy logoff checker is disabled
 
   The port is a(n) authenticator
 
   Authenticate Mode is auto
 
   Port Control Type is Mac-based
 
   Max on-line user number is 1024
 
... (Omitted) 
dot1x
Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
Table 40   Description of 802.1x configuration information
Field 
Description 
Equipment 802.1X protocol is enabled 
802.1X protocol is enabled on the switch. 
CHAP authentication is enabled 
CHAP authentication is enabled 
DHCP-launch is disabled 
If any user configures a static IP without 
authorization in DHCP environment, the 
switch will trigger authentication on the user. 
Proxy trap checker is disabled 
The system does not check the access of users 
who log on through a proxy. 
Proxy logoff checker is disabled
Transmit Period 
Transmit interval timer 
Handshake Period 
The interval of sending handshake packets of 
802.1x 
Quiet Period 
Quiet period set by Quiet timer 
Quiet Period Timer is disable 
Quiet Period Timer is disable 
Supp Timeout 
Timeout timer for Supplicant authentication 
Server Timeout 
Timeout timer for Authentication Server 
The maximal retransmitting times 
The maximal times for the Ethernet switch to 
retransmit authentication request frames to 
access user 
Total maximum 802.1x user resource number  The maximum number of access users allowed 
Total current used 802.1x resource number 
Number of access users currently on line 
Ethernet3/1/1 is link-up 
The state of Ethernet 2/1/1 is Up. 
802.1X protocol is disabled 
802.1X protocol is disabled on the port 
Proxy trap checker is disabled 
The port prohibits the access of users who log 
on through a proxy 
Proxy logoff checker is disabled
The port is a(n) authenticator 
The port acts as authenticator 
Authenticate Mode is auto 
The authentication mode of the port is Auto 
Port Control Type is Mac-based 
The port control type is Mac-based, namely, 
authentication of access users is implemented 
based on the MAC address. 
Max on-line user number 
The maximum number of on-line users 
... 
Omitted