3com 8807 참조 가이드

Use the apply isis command to configure to apply the level of a matched route to 
be imported to Level-1, Level-2 or Level-1-2.

Use the undo apply isis command to cancel the Apply sub-statement.

By default, no apply clause is defined.

Related command: if-match interface, if-match acl, if-match ip-prefix, 
if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip 
next-hop, apply cost, apply origin, apply tag.

# Define an apply clause, setting to import the route to a level-2 area.

[3Com-route-policy] apply isis level-2 

apply local-preference local-preference-value

Route policy view

local-preference: Newly set local preference.

Use the apply local-preference command to configure to apply the local 
preference of route information.

Use the undo apply local-preference command to cancel the Apply 
sub-statement.

Related command: if-match interface, if-match acl, if-match ip-prefix, 
if-match ip next-hop, if-match cost, if-match tag, route-policy, apply ip 
next-hop, apply local-preference, apply origin, apply tag.

# Define an Apply sub-statement. Apply the local preference level of route 
information as 130 when this Apply sub-statement is used for setting route 
information attribute. .

[3Com-route-policy] apply local-preference 130 

apply origin { igp | egp as-number | incomplete }