3com 8807 참조 가이드
MBGP Multicast Extension Configuration Commands
677
Use the undo preference command to restore the default priority.
You can configure different priority values for different types of MBGP routes.
Example
# Set the priority of EBGP, IBGP and local routes all to 170.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] bgp 100
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] preference 170 170 170
reflect between-clients
Syntax
reflect between-clients
undo reflect between-clients
View
IPv4 multicast sub-address family view
Parameter
None
Description
Use the reflect between-clients command to enable route reflection between
clients.
clients.
Use the undo reflect between-clients command to disable route reflection
between clients.
between clients.
When configured, the route reflector can reflect routes of a client to other clients.
By default, all-connection is not required for the clients with route reflectors
configured, since the routes are by default reflected from one client to others. For
all-connection clients, route reflection is unnecessary.
configured, since the routes are by default reflected from one client to others. For
all-connection clients, route reflection is unnecessary.
Related command: reflector cluster-id and peer reflect-client.
Example
# Disable route reflection function.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] bgp 100
[3Com-bgp] ipv4-family multicast
[3Com-bgp-af-mul] undo reflect between-clients
refresh bgp multicast
Syntax
refresh bgp { all | peer-address | group group-name } multicast { import |
export }
export }