3com 8807 참조 가이드

None

Use the snmp-agent trap enable ldp command to enable Trap function in MPLS 
LDP creation.

Use the undo snmp-agent trap enable ldp command to disable Trap function in 
MPLS LDP creation.

By default, Trap function is not enabled during MPLS LDP creation.

# Enable the Trap function during MPLS LDP creation.

<SW8800> system-view

 

[SW8800] snmp-agent trap enable ldp 

System view

None

Use the snmp-agent trap enable lsp command to enable Trap function in MPLS 
LSP creation.

Use the undo snmp-agent trap enable lsp command to disable Trap function in 
MPLS LSP creation.

By default, Trap function is disabled during MPLS LSP creation.

# Enable the Trap function during MPLS LSP creation.

<SW8800> system-view

 

[SW8800] snmp-agent trap enable lsp 

static-lsp egress lsp-name [ l2vpn ] incoming-interface interface-type 
interface-number in-label in-label-value

undo static-lsp egress lsp-name

MPLS view