3com 8807 참조 가이드

Any view

ccc-name: Name of the CCC connection whose information is to be displayed.

type local: Displays information about the local CCC connections only.

type remote: Displays information about the remote CCC connections only.

Use the display ccc command to display the information about specified CCC 
connections.

# Display information about the CCC connection named c-link.

<SW8800> display ccc c-link

 

name: c-link, type: remote, state: down,

 

intf: Vlan-interface1003 (down), tran-lsp: ccc2 (up), rcv-lsp: ccc1 (up) 

static-lsp egress lsp-name l2vpn incoming-interface vlan-interface vlan-id 
in-label in-label

undo static-lsp egress lsp-name

MPLS view

lsp-name: Name of the label switching path (LSP).

vlan-id: ID of the VLAN whose interface is to be used to create the LSP.

in-label-value: Value of the in-label, ranging from 16 to 1,023.

Use the static-lsp egress l2vpn command to create a static L2VPN LSP for the 
egress label switching router (LSR).

Use the undo static-lsp egress command to remove a L2VPN LSP created for the 
egress LSR.

You need to create two LSPs (for transmitting and receiving) before creating a 
remote CCC connection.

Related command: static-lsp ingress l2vpn, static-lsp transit l2vpn, 
debugging mpls.

# Create a static LSP named bj-sh on the egress LSR.