3com 8807 참조 가이드
804
C
HAPTER
44: HA C
ONFIGURATION
C
OMMANDS
_HA_C
ONFIGURATION
using a command if he expects the slave fabric to operate in place of the master
fabric. After the switchover, the slave fabric will control the system and the original
master fabric will be forced to reset.
fabric. After the switchover, the slave fabric will control the system and the original
master fabric will be forced to reset.
Example
# Enable master-slave switchover manually.
<SW8800> slave switchover
Caution!!! Confirm switch slave to master[Y/N]?y
Starting.....
RAM Line....OK
slave update
configuration
Syntax
slave update configuration
View
User view
Parameter
None
Description
Use the slave update configuration command to manually synchronize the
configuration file between the master and slave fabrics.
configuration file between the master and slave fabrics.
Related command: slave auto-update config.
Example
# Synchronize the configuration file between the master and slave fabrics.
<SW8800> slave update configuration
xbar
Syntax
xbar [ load-balance | load-single ]
View
System view
Parameter
load-balance: Sets Xbar load balance mode.
load-single: Sets Xbar load single mode.
Description
Use the xbar command to configure the load mode of the master/slave fabric.
By default, the master and slave fabrics are both in load single mode.
c
CAUTION: When a single fabric is in position, the load-balance mode is not
effective and the fabric changes to the load-single mode automatically.
effective and the fabric changes to the load-single mode automatically.