3com 8807 참조 가이드

System view

None

Use the dhcp server detect command to enable fake DHCP server detection.

Use the undo dhcp server detect command to disable fake DHCP server 
detection.

Fake DHCP server detection is disabled by default.

# Enable fake DHCP server detection.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] dhcp server detect 

debugging dhcp server { all | error | event | packet }

undo debugging dhcp server { all | error | event | packet }

User view

all: Used to enable/disable all types of debugging for DHCP server.

error: Used to enable/disable error debugging for DHCP server errors, including 
those occur when a DHCP server processes DHCP packets or assigns IP addresses.

event: Used to enable/disable debugging for DHCP server events, including the 
assigning of IP addresses and timing out of ping packets.

packet: Specifies debugging for packets received/sent by DHCP servers, including 
DHCP packets and ping packets.

Use the debugging dhcp server command to enable debugging for DHCP 
server.

Use the undo debugging dhcp server command to disable debugging for DHCP 
server.