3com 8807 참조 가이드

C

HAPTER

 53: SNMP C

ONFIGURATION

 C

OMMANDS

snmp-agent trap queue-size length

System view

length: Length of queue, ranging from 1 to 1,000. By default, the length is 100.

Use the snmp-agent trap queue-size command to configure the information 
queue length of Trap packet sent to Destination Host.

Use the undo snmp-agent trap queue-size command to restore the default 
value.

Related command: snmp-agent trap enable, snmp-agent target-host, 
snmp-agent trap life.

# Configure the queue length to 200.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] snmp-agent trap queue-size 200 

snmp-agent trap source vlan-interface vlan-id

System view

vlan-id: Specifies the VLAN interface ID, ranging from 1 to 4094.

Use the snmp-agent trap source command to configure the source address for 
sending Trap.

Use the undo snmp-agent trap source command to cancel the source address 
for sending Trap.

You can use this command to configure to track specific event by using the trap 
address.

# Configure the IP address of the VLAN interface 1 as the source address for 
transmitting the Trap packets.