3com 8807 사용자 가이드

With the device management function, the switch can display the current running 
state and event debugging information about the slots, thereby implementing the 
maintenance and management of the state and communication of the physical 
devices. In addition, there is a command available for rebooting the system, when 
some function failure occurs.

The main device management tasks are to check the status of the modules, CPU, 
and the memory usage of the switch.

The following sections describe the configuration tasks for device management:

■

■

■

■

■

■

It would be necessary for users to reboot the switch when failure occurs.

Perform the following configuration in user view.

After you enable the timing reboot function on the switch, the switch will be 
rebooted on the specified time.

Perform the following configuration in user view, and display schedule reboot 
command can be performed in any view.

Table 744   Reboot the switch

Root the switch 

reboot [ slot slot-no ]

Table 745   Enable the Timing Reboot Function

Enable the timing reboot function of the 
switch, and set specified time and date 

schedule reboot at hh:mm [ yyyy/mm/dd ] 

Enable the timing reboot function of the 
switch, and set waiting time 

schedule reboot delay { hhh:mm | mmm }