3com 8807 사용자 가이드

<SW8800>system-view

 

System View: return to User View with Ctrl+Z.

 

 [SW8800] nqa administrator icmp 

# Configure the test type as icmp.

[SW8800-nqa-administrator-icmp] test-type icmp 

# Configure the destination IP to 192.168.80.80.

[SW8800-nqa-administrator-icmp] destination-ip 192.168.80.80 

# Configure the test times to 5.

[SW8800-nqa-administrator-icmp] count 5 

4 Execute the test

# Execute one test.

[SW8800-nqa-administrator-icmp] test-enable 

5 Display the test results

# Display the results of this test in this test group.

<SW8800> display 

nqa

 results administrator icmp

 

  

nqa

 entry(admin administrator, tag icmp) test results:

 

      Destination ip address:192.168.80.80

 

      Vpn-instance: NULL

 

      Send operation times: 5              Receive response times: 5

 

      Min/Max/Average Round Trip Time: 21/33/25

 

      Square-Sum of Round Trip Time: 3557

 

      Last complete test time: 2005-12-8 11:22:33.4

 

    Extended result:

 

      Packet lost in test: 0%

 

      Disconnect operation number:0        Operation timeout number:0

 

      System busy operation number:0       Connection fail number:0

 

      Operation sequence errors:0          Drop operation number:0

 

      Other operation errors:0 

Use the display command to display the operation status after the above 
configurations. Verify the configuration effect through the displayed information.

Table 819   Display and maintain NQA

Display the configuration information 

display current-configuration or display 
this in NQA test group view 

Display the test results 

display nqa { results | history } [ 
administrator-name test-tag ]