Xerox xc23 사용자 가이드
Helpful hints
XC23/XC33/XC33D User Guide
6
Helpful hints
Care of your copier:
Do not place heavy objects on any surface of the copier.
Ensure that liquids are not placed near or spilled onto the
copier.
copier.
Do not place paper clips or staples on the copier surface.
As required, refer to the section entitled
Copier care.
Maintenance:
Clean the document glass daily.
Do not apply cleaning liquids or sprays directly on to the
copier; first apply the liquid onto a cloth.
copier; first apply the liquid onto a cloth.
Store copy paper on a flat surface in a dry area and in an
enclosed cabinet.
enclosed cabinet.
Tightly wrap any partially used reams of paper.
Copier location:
For reliable copier operation and copy quality,
XEROX
recommends the following:
Place your copier in a well-ventilated room.
Ensure that the environmental conditions are:
Temperature:
50
o
F-95
o
F(10
o
C-35
o
C)
Relative humidity:
15-85%
Note: If the temperature is at 95
o
F(35
o
C), humidity
should be below 47.5%; if humidity is at 85%
temperatures should be below 82
temperatures should be below 82
o
F(27.8
o
C).
Place the copier on a flat level surface:
Ensure that the copier is level; this provides
optimum performance
optimum performance
Avoid locations that subject the copier to:
Direct
sunlight
Extreme changes in the temperature or humidity
After selecting a location that meets the conditions listed
above, ensure there is sufficient floor space around the
copier for service (refer to the section entitled
above, ensure there is sufficient floor space around the
copier for service (refer to the section entitled
Floor
space requirements, in this section).