Xerox xc23 사용자 가이드

Keeping the ADF/DADF belt clean helps prevent ADF/DADF
misfeeds.  

XEROX

 suggests that you clean the belt as needed.

Note:  This procedure is for copiers which are equipped with the
ADF/DADF.

Caution:  Do not pour or spray water directly on the belt.

1.  Switch the copier off.

2.  Slightly dampen a soft lint-free cloth or paper towel with

water.

3.  Raise the ADF/DADF.

4.  Cover the document glass to prevent water from spilling

on the glass.

5.  Wipe the exposed surface of the belt until it is clean.

6.  Pull the belt from the right to left to expose dirty sections

of the belt.

7.  Repeat the cleaning procedure until the entire belt is

clean and dry.

8.  Close the ADF/DADF.

9.  Switch the copier on.