Xerox xc23 사용자 가이드
Problem solving
84
XC23/XC33/XC33D User Guide
Misfeeds
Problem
Suggested solutions
Documents or paper is misfed.
If a status code appears (XC23/XC33) or a message
(XC33D), refer to the appropriate section entitled
(XC33D), refer to the appropriate section entitled
Clearing
the status codes (XC23/XC33) or XC33D problem solving
messages (XC33D).
messages (XC33D).
Ensure the paper trays and bypass trays are firmly in
place.
place.
Paper misfeeds or wrinkles occur repeatedly.
Ensure the paper trays and the bypass tray are not filled
above the MAX lines.
above the MAX lines.
Turn the paper stack around and/or over in the selected
paper tray.
paper tray.
Replace the paper in the selected paper tray with paper
from a new package.
from a new package.
If there are corner snubbers in the selected paper tray
ensure the paper is under the snubbers.
ensure the paper is under the snubbers.
Remove any partially feed paper from the trays.
Fan all four edges of the paper in the selected paper tray.
Ensure the proper paper specifications are used in the
trays, refer to the section entitled
trays, refer to the section entitled
Paper.
Remove a few sheets from the top and the bottom of the
stack in the selected paper tray.
stack in the selected paper tray.
Do not leave the paper in high humidity areas for
extended periods of time.
extended periods of time.
Paper should be kept in the original wrapper and stored
flat in a dry environment when not in use.
flat in a dry environment when not in use.
Documents do not feed in when using the
ADF/DADF.
ADF/DADF.
If a status code appears (XC23/XC33) or message
(XC33D), refer to the appropriate procedure in the section
entitled
(XC33D), refer to the appropriate procedure in the section
entitled
Clearing the status codes (XC23/XC33) or
XC33D problem solving messages (XC33D).
Ensure all the ADF/DADF covers are closed.
Ensure the proper original paper specifications are used
in the ADF/DADF, refer to the section entitled
in the ADF/DADF, refer to the section entitled
Paper.
The corner of a document is folded when
using the ADF/DADF.
using the ADF/DADF.
Ensure the originals are not curled. Make a copy of any
damaged original and reload the new and uncurled
original in the ADF/DADF.
damaged original and reload the new and uncurled
original in the ADF/DADF.
Documents misfed repeatedly when using the
ADF/DADF.
ADF/DADF.
Ensure the guide in the ADF/DADF is touching the edge
of the originals.
of the originals.
Ensure the proper original paper specifications are used
in the ADF/DADF, refer to the section entitled
in the ADF/DADF, refer to the section entitled
Paper.